|
Depends what are you looking to get out of your car?
Personally...
$ 25 - Short Stick
$400 - Long tube headers
$200 - Y-Pipe
$400 - Catback
That right there is a grand. It's a good foundation to start with and many different directions you can go from there. If you wanted to concentrate more on getting the power to the ground you can work on suspension
$275 - Lower Control Arms & Panhard Bar
$ 60 - Relocation Brackets
$300 - Adj Torque Arm
$150 - Subframe Connector
$275 - Sway Bar Set
Now all that totals $2085 but I rounded up on the prices of most of the things so it should be closer to 2000.
Or you could go with just wanting to make more power and in that case with $1000 to spend after the exhaust I'd do a cam and with supporting mods etc. it will cost aprox $1000
__________________
97 WS.6 - Meziere EWP, Pacesetter Longtubes, Duals w/ X pipe and Powersticks, Spec Stage 2, LS1 Driveshaft, Richmond 4.10s, LCA, Relocation Brackets, SFC, Chassis Mounted Adj Torque Arm
 ]
Last edited by transamws6_97; 06-28-2007 at 10:26 PM..
|