|
I drove it for a little over a year lowered two inches with no suspension mods, it drove good, didn't have much of any traction in 1st or 2nd gear, but I also had put 410's in before I did anything else.
Also if you lower it you should get an adjustable torque arm to correct and adjust your pinion angle.
I'm not sure about SPOHN, (just haven't tried any), but I know BMR makes good stuff.
I would recommend (by experience) that if you want a two inch dropp to skipp the Eibachs and just get you QA1's adjustable coil overs. I believe that MTI has them listed for the full set at $750, they are worth the extra money!!
Oh, and welcome to the site!
|