B & M Shifter Help !!!!!!!

[sully & son]

INSTALLING A B&M CONSOLE MEGA SHIFTER 80692 IN MY 86 Z28
I PUT THE SHIFTER IN LOW GEAR AND ADJUSTED THE LARGE NUTS SO THE SWIVEL IS IN THE FRONT HOLE.....GREAT.....WHEN I MOVE THE SHIFTER TO PARK AND THE TRANNY LEVER TO PARK THE SWIVEL IS supposed TO LINE UP WITH THE FIRST HOLE...BUT IT IS TO FAR FORWARD...LIKE THERE SHOULD BE ONE MORE CLICK ON THE TRANS LEVER.....I'M OFF 1/4" AND IF I MOVE IT, THE SWIVEL DOESN'T NOT LINE UP IN PARK. THE INSTRUCTION SAY IT MUST FIT OR YOUR TRANNY & SHIFTER ARE TOAST....ANY SUGGESTIONS? SULLY.

[85camaroland]

the mega shifter can fit a 3 or 4 speed tranny make sure you are setting it up for 4 speed operation the same mistake was made on mine