|
|||
|
question for exhaust
i just ordered a bullet for my camaro. now its my only car and is a DD. i was told that if i just dump it right after the bullet it'll sound pretty mean.but i'm not sure since i even drive it in the winter weather or not to just dump it or just finish just runnin the pipes out the back.thanx
__________________
1997 Camaro Z28: CAI,dynomax bullet dumped,competely rebuilt tranny w/ corvette servo. and thats about it for now. DAVE - thanks toofazt for the sig
|
|
||||
|
your exhaust dosnt have to exit the rear,it only has to me past the doors of the car.ive had my exhaust dumped like that for a long time and have no problems at all
www.93z28.com/forum/images/pics/HPIM0075.jpg www.93z28.com/forum/images/pics/HPIM0074.jpg
__________________
93 Z28 M29 6 speed,K&N FIPK,T/B Bypass,Pace Setter mids,3 inch Magnaflow H/F Cat & Mufler,30LB SVO Inj,Pro 5.0 Shifter,Air Foil,Vortech Elbow,Adj LCA`s,LCA Relocation Brackets,Adj Panhard Bar,55 GPM Electric Water Pump,Underdrive Pully,MSD 6al,MSD Launch Controls,MSD Coil,MSD 8.5mm wires,255 lph Fuel Pump,160 Deg stat,steal braided break lines,madz28.com tune,batery in back,M/T ET Streets,line lock,15x3.5&8 pro stars,weight=2960 lbs,12.9@106.6 |
|
|||
|
well thats one for each way.i need sombody with the decieding factor to help me out here.
__________________
1997 Camaro Z28: CAI,dynomax bullet dumped,competely rebuilt tranny w/ corvette servo. and thats about it for now. DAVE - thanks toofazt for the sig
|
|
||||
|
Quote:
__________________
93 Z28 M29 6 speed,K&N FIPK,T/B Bypass,Pace Setter mids,3 inch Magnaflow H/F Cat & Mufler,30LB SVO Inj,Pro 5.0 Shifter,Air Foil,Vortech Elbow,Adj LCA`s,LCA Relocation Brackets,Adj Panhard Bar,55 GPM Electric Water Pump,Underdrive Pully,MSD 6al,MSD Launch Controls,MSD Coil,MSD 8.5mm wires,255 lph Fuel Pump,160 Deg stat,steal braided break lines,madz28.com tune,batery in back,M/T ET Streets,line lock,15x3.5&8 pro stars,weight=2960 lbs,12.9@106.6 |
|
||||
|
Quote:
__________________
ubi dubium ibi libertas |
|
||||
|
Quote:
__________________
93 Z28 M29 6 speed,K&N FIPK,T/B Bypass,Pace Setter mids,3 inch Magnaflow H/F Cat & Mufler,30LB SVO Inj,Pro 5.0 Shifter,Air Foil,Vortech Elbow,Adj LCA`s,LCA Relocation Brackets,Adj Panhard Bar,55 GPM Electric Water Pump,Underdrive Pully,MSD 6al,MSD Launch Controls,MSD Coil,MSD 8.5mm wires,255 lph Fuel Pump,160 Deg stat,steal braided break lines,madz28.com tune,batery in back,M/T ET Streets,line lock,15x3.5&8 pro stars,weight=2960 lbs,12.9@106.6 |
|
||||
|
in california your exhaust only has to pass your doors,not your axles.
__________________
93 Z28 M29 6 speed,K&N FIPK,T/B Bypass,Pace Setter mids,3 inch Magnaflow H/F Cat & Mufler,30LB SVO Inj,Pro 5.0 Shifter,Air Foil,Vortech Elbow,Adj LCA`s,LCA Relocation Brackets,Adj Panhard Bar,55 GPM Electric Water Pump,Underdrive Pully,MSD 6al,MSD Launch Controls,MSD Coil,MSD 8.5mm wires,255 lph Fuel Pump,160 Deg stat,steal braided break lines,madz28.com tune,batery in back,M/T ET Streets,line lock,15x3.5&8 pro stars,weight=2960 lbs,12.9@106.6 |
|
||||
|
Quote:
__________________
|
|
|||
|
well i just went with the exhaust dumped after the bullet.i'm happy with the sound.its a nice deep tone.not too loud when i idle but when i hit the gas is loud as hell.
__________________
1997 Camaro Z28: CAI,dynomax bullet dumped,competely rebuilt tranny w/ corvette servo. and thats about it for now. DAVE - thanks toofazt for the sig
|
|
||||
![]()
__________________
93 Z28 M29 6 speed,K&N FIPK,T/B Bypass,Pace Setter mids,3 inch Magnaflow H/F Cat & Mufler,30LB SVO Inj,Pro 5.0 Shifter,Air Foil,Vortech Elbow,Adj LCA`s,LCA Relocation Brackets,Adj Panhard Bar,55 GPM Electric Water Pump,Underdrive Pully,MSD 6al,MSD Launch Controls,MSD Coil,MSD 8.5mm wires,255 lph Fuel Pump,160 Deg stat,steal braided break lines,madz28.com tune,batery in back,M/T ET Streets,line lock,15x3.5&8 pro stars,weight=2960 lbs,12.9@106.6 |
|
|||
|
You guys are forgetting one key thing about dumping the is under the car instead of out the rear. If rust is a problem in your state then not taking the pipe on out the back can cause a major rust problem and expensive repairs in the future. I have seen it done by idots here in Virginia that just because the state law says it has to go back past the cab have rusted out a many pickup truck beds. Just a thought man hope it helps.
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Turbo Question... | VetteC5RFrEak | Induction | 3 | 07-26-2006 10:01 PM |
| Question change heads for Supercharger | Hondadream50 | Forced Induction | 7 | 11-16-2003 06:04 PM |
| Simple Fuel Filter Question | BigJustinZ28 | Misc. Tech Support | 3 | 11-06-2003 09:14 AM |
| Buying Question | rich1223 | Engine Tech | 12 | 09-02-2003 11:30 PM |
| one question on a 160* thermostat | zul8er | Engine Tech | 2 | 07-24-2003 02:11 PM |