|
|
|||||||
| Forced Induction Super Charger & Turbo Talk |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-27-2007, 09:59 PM
|
|||
|
|||
|
Motor Build Help
Ok guys, heres the plan.
I found a 1992 rs for a not bad price, but i really hate the idea of a 305. So the goal is to buy a chevy crate motor, the 350/290, as a replacement. First question, since its a carb motor, how hard will it be to swap in? Also, any idea if the motor will be capable of handeling the power produced by this supercharger? Links Motor http://www.gmperformanceparts.com/En...case/index.jsp Super Charger http://www.holley.com/6510-1.asp
__________________
- 1997 z28 - 6 Speed - Pacesetter Long Tubes - ORY -Magnaflow Catback - !Skipshift - O2 Sims - 
|
|
11-28-2007, 11:07 AM
|
||||
|
||||
|
if the motor is rated at 290, its probably running cast internals. hyper-eutectic pistons at best. i would not boost this motor, or ask it to make more than 375hp. call GMPP.
__________________
-Wes  if it doesn't move but should, use WD-40. if it moves but shouldn't, use duct tape.
|
|
11-28-2007, 12:57 PM
|
|||
|
|||
|
Call SDPC
or visit their website www.sdpc2000.com They will be able to help you out tremendously! Thanks!
|
|
11-28-2007, 09:08 PM
|
|||
|
|||
|
Since its a new block, i could put forged pistons in it pretty easy no? Without having to hone the cylinders and whatnot? Seeings how its a 4 bolt main and whatnot, i figure it would be capable of a bit more then 375hp with not too much modification. I know heads and stuff would have to be changed out, but it shouldnt be to bad?
__________________
- 1997 z28 - 6 Speed - Pacesetter Long Tubes - ORY -Magnaflow Catback - !Skipshift - O2 Sims -
|
|
12-09-2007, 03:48 PM
|
|||
|
|||
|
if your going to get a brand new motor get ones that's ready to go. i'm sure you could talk to scoggin ****************ey and they can get you one with forged piston's and nicer rods
__________________
my v6 finally grew up to an lt1!!  
|
|
12-09-2007, 03:49 PM
|
|||
|
|||
|
wow thats a name of a shop, can a mod fix that blurr please
__________________
my v6 finally grew up to an lt1!!
|
|
12-13-2007, 07:19 PM
|
|||
|
|||
|
One word : CENTRIFUGAL
Either way ...... I would buy a used 4 bolt block and put the parts you need in it . ( perferably a factory roller ) Low compression forged pistons and H beam rods . Just an opinion . Blow-thru carbs rule...... 
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
