|
||||
|
Is this the 1LE Elbow part number??
I've been given the part number or the "1LE" elbow according to GM Parts Direct ( http://www.gmpartsdirect.com/ ) and a local GM dealer over the phone. The list price at my dealer was $89 on this part and online it was around $48.
Part Number: 25147186 The problem is there is no picture and i don't know if this is the elbow I want - without the noise cancelation tube Is anyone famliar with this part or part number who could identify it as the 1LE elbow. I know they sell them aftermarket at upwards or $85 but i'd like to keep it GM if possible and the $48 is nice also... |
|
|||
|
u can do it yourself. Just get a pvc end cap or even the top cap for a stick of deodorant will work, you'll also need an adjustable hose clamp, and pull that stupid noise dampner off. It's alot cheaper, and unless you're going for cosmetics, then it works just as well. Just my 2 cents, good luck.
|
|
|||
|
GM part, #25147187 got it for 51.52 from dal slabaugh (van devere pont-buick) mailto:lockitup@bright.net
Regards
__________________
Z28 -95, Hooker SC headers, LT4 km, 3" Catback, B&M Ripper Shifter, !Cags, !Air, !Egr, CAI/KN Filter, 1LE Intake elbow, Airfoil, LS1 alu drive shaft, Bilstein shocks, Taylor ovc wires, Ported heads with 2.02/160 valves and a hotcam kit is going in soon. |
|
|||
|
Quote:
![]() The downsida to owning a f-body in sweden is the total lack of aftermarket things to mod it with so I've almost imported everything from the states, now I'm saving up for a hotcam kit and porting of my heads.....money money I've seen 1 more f-body here were I live since that, but that is a pontiac that lacks two cylinders if you know what I mean We have a board as well for the camaro, with the 4:th gen as well...you can check it out but I'll guess you won't understand a thing ![]() http://camaroforum.mine.nu/ Regards.
__________________
Z28 -95, Hooker SC headers, LT4 km, 3" Catback, B&M Ripper Shifter, !Cags, !Air, !Egr, CAI/KN Filter, 1LE Intake elbow, Airfoil, LS1 alu drive shaft, Bilstein shocks, Taylor ovc wires, Ported heads with 2.02/160 valves and a hotcam kit is going in soon. |
|
|||
|
Quote:
It sits in my parents neighbour garage now for the winter just waiting for the spring ![]()
__________________
Z28 -95, Hooker SC headers, LT4 km, 3" Catback, B&M Ripper Shifter, !Cags, !Air, !Egr, CAI/KN Filter, 1LE Intake elbow, Airfoil, LS1 alu drive shaft, Bilstein shocks, Taylor ovc wires, Ported heads with 2.02/160 valves and a hotcam kit is going in soon. Last edited by Dan (gearhead); 11-13-2003 at 06:38 AM.. |
|
||||
|
so the gm part number 25147187 is the right one?
when i ran the number through http://www.gmpartsdirect.com it comes up as "Air Cleaner and Silencer" the number one lower, pn 25147186, has no picture and is like $2 and change more and says the same thing except the cost n that there is no picture. what i wanna be sure of is that 25147187 is the right one for the 1LE elbow without the extra tube or "silencer" |
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need a part number please | Zlvr95 | Drivetrain | 2 | 08-19-2006 02:16 PM |
| head gasket part number | streetrod93 | Engine Tech | 0 | 08-08-2006 01:17 PM |
| 1LE Shocks Part Number? | x10-wakerider | Suspension | 5 | 07-17-2006 11:46 AM |
| Part Number | dkishton1486 | Drivetrain | 2 | 06-21-2006 01:19 PM |
| 1LE Elbow... | GlueFactory | Induction | 6 | 07-18-2003 07:54 AM |