info please

[nate]

this week i finally have some time for myself.
i'm going to be changing my plugs and putting on 8mm spiro pro series taylor wires, oil change ( not overly needed but wtf) cleaning out the KnN.
and i want to do as many of the free mods as possible.
mainly the cold air mod.
can any1 tell me of any problems they encountered while doing these aswell as what ones the would do right away.
i'm hopefully getting a lid and smooth bellow too if i can find a place near me with it in stock.
oh and can some1 tell me that website for the free mods again.
thanx alot man.
wish me luck with those damn plugs

[metalhead_z28]

www.installuniversity.com has step by step picture instructions for all the free mods i believe. with free ram air you may notice a slight whistle but its not bothersome. and if you do the throttle body "bump" mod, Make sure not to grind too much off because it will throw a code. hope that helps and if ya have any questions on anything im sure someone on here will have answers for ya

[tigertank]

first go to Lowes or home depot and go to plumbing dept and get a peice of i think it was 3 inch may have been 31/2 silicone or rubber hose and cut to fit. ya got your smooth bellows 4 to 5 dollars much cheaper cause after you put the lid on its only about 1 or 2 needed the neck on the lids are longer thought youd like to save some $$$$$$$$$$

[Mykdiver]

The free mods are very easy. In the mean time before you get your new lid, you can dremmel out the baffles in the stock lid, that will cut out some of the restriction.