|
||||
|
OK here we go.
1. If you have a rear defogger there will be little wires running through the back window and the button to turn it on is at the bottom left corner of your heater controls. 2. Ask Ryatt-Motion how to do that, he is da man on body and paint work. 3. As far as what cam you should get depends on alot. Is it a auto or manual, what rear is in it, also how much performance do you want? Is it a daily driver and need to stay that way? 4. avg. gas mileage on a LS1 is 18 give or take a little. It sounds like you arent getting very good gas mileage at all. I would do a complete tune up on the car and have the codes pulled to check if there are any problems. Is the SES light on?
__________________
The Tomahawk 02 SOM WS6 T/A - M6 - 3.42 gears Performance Mods: Jet Hot LT headers, Ceramic Coated 3" ORY, SLP LM w/ SpinTech Muffler, Pro 5.0 Shifter, Volant Intake, Strut Tower Brace, Ram Powergrip Clutch, Taylor Wires, Slotted and Cross Dimpled Brake Rotors. Apearance Mods: Racing Stripes, MBA Head Plate Cover, Battery & Fuse Box Covers, Silver gauges, Window tint. (mod on www.ls1racer.com) Nic
|
|
||||
|
Yep I agree thats why your so bad.
__________________
The Tomahawk 02 SOM WS6 T/A - M6 - 3.42 gears Performance Mods: Jet Hot LT headers, Ceramic Coated 3" ORY, SLP LM w/ SpinTech Muffler, Pro 5.0 Shifter, Volant Intake, Strut Tower Brace, Ram Powergrip Clutch, Taylor Wires, Slotted and Cross Dimpled Brake Rotors. Apearance Mods: Racing Stripes, MBA Head Plate Cover, Battery & Fuse Box Covers, Silver gauges, Window tint. (mod on www.ls1racer.com) Nic
|
|
|||
|
yes i get 21 to 23 mph with 2.74 need a better gear i know! hey bowtie that girdle and stud kit where can i get it and what should in ask for at the auto parts place you know the correct name for it thanks rodney
__________________
2002 Z28 White, Black leather Int, TTops, free ram air mod with air lid and K&N, descreened MAF, LS1 Edit, custom SFC, 3 inch mandrel bent exhaust with no cats and magnaflow muffler, BMR strut tower brace,chromeZo6 wheels with continental tires BMR LCA and Panhard rod more to come!! #2 2004 C5 Black/Black leather, both tops, 6 speed fully loaded..... 9500 miles my bimbo pickin up car!!!!!!!!!1 |
|
||||
|
Can you tell me what the issue is with your paint that requires restoration of the paint, is it faded, peeling etc?
__________________
![]() ![]() "In Loving Memory of Surjit "MOTION SR." Ryatt, 6-12-1939 to July 8, 2008" "Y'all heard, I stay hood streets like curbs and never forget where - I - come - from - !."
|
|
||||
|
Quote:
Hey Rodney!! If there is a performance shop around you that sells stuff like that then they would either call it a "rear end girdle" or a "Performance rear end cover" The stud kit that goes in screw into your main caps on the rear end replacing the factory bolts. This helps to stiffen the caps up so they dont deflect. Then the girdle botls onto the back and has little studs that push on the caps to further stiffen everything up. I got mine from Thunder Racing, they were the cheapest place I could find and they are a site sponser. I think its a mod thats well worth the money. Heres the link to the TR one... http://www.thunderracing.com/catalog...vid=3&pcid=210
__________________
The Tomahawk 02 SOM WS6 T/A - M6 - 3.42 gears Performance Mods: Jet Hot LT headers, Ceramic Coated 3" ORY, SLP LM w/ SpinTech Muffler, Pro 5.0 Shifter, Volant Intake, Strut Tower Brace, Ram Powergrip Clutch, Taylor Wires, Slotted and Cross Dimpled Brake Rotors. Apearance Mods: Racing Stripes, MBA Head Plate Cover, Battery & Fuse Box Covers, Silver gauges, Window tint. (mod on www.ls1racer.com) Nic
|
|
||||
|
I was surprised when I bought mine the dealer asked me if I wanted a rear defroster. Apparently it is (or unfortuntely "was") an optional item. Living up here it is almost a "must have". I had some trouble with mine a couple days ago. The defroster and power seat share a 30 amp fuse. It is not a standard ATC fuse but encased in a metal housing. Turned on the defroster, went to adjust the seat and nothing. Looked down, rear defroster is off. hit the button a couple times - nothing. Pulled over, got out manual, found fuse, burned fingers trying to pull fuse out.
Very spooky. Left it out and drove home. Reinstalled and for the moment it seems O.K. but with that thing drawing enough current to burn my fingers I am very concerned! Think there may be an intermittant short to ground. Woo hoo. I do not want to melt my Z! |
|
||||
|
Yeah, my 02 SS doesn't have the defogger either. I thought about seeing how hard it was to retrofit because it can be a real chore to see out that back window when the car has been sitting outside for a while in the cold.
To fix the paint, I recommend first getting a Zaino starter kit. I would clay wash the car and give it 3 coats of Z-5 swirl remover and 3 coats of Z-2 polish. That should make it look nice and electric!!
__________________
![]() ![]() "In Loving Memory of Surjit "MOTION SR." Ryatt, 6-12-1939 to July 8, 2008" "Y'all heard, I stay hood streets like curbs and never forget where - I - come - from - !."
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Car Loan Questions? | Ricky_Fitness | Z Lounge | 6 | 07-27-2006 10:18 PM |
| Electric Water Pump Questions | Spitfire | Engine Tech | 8 | 07-25-2006 05:32 PM |
| So Many Questions... | 86IROCZ | Z Lounge | 14 | 07-06-2006 10:36 PM |
| been a while, got a couple quick questions | camaroguy93 | Computer/Electrical | 4 | 06-22-2006 09:52 PM |
| Some questions | 12sec94z | Engine Tech | 2 | 06-19-2006 09:29 PM |