10-16-2006, 10:56 PM
|
||||
|
||||
|
17x11's w/315's
any body run the 17x11's w/ 315-35's if so what offset and any tire clearance issues i've only found one person around here with them and he has 500 pounds of stereo in the back but says it rubs the outer quarter lip turning into parking lots. just want you're opinions
|
|
10-16-2006, 11:09 PM
|
||||
|
||||
|
I dont, but i know alot of people run 315's w/o any problems. Occasionally the fender lip wil need to be rolled in, or the bumpstop removed but nothing serious.
__________________
---Josh---  Quote:
|
|
10-16-2006, 11:23 PM
|
|||
|
|||
|
Roll the fender lid and BFH the wheel well, they fit
__________________
My Rides   Mods:Corsa Premium series Catback, Ported throttle Body, Slp cold air pack, MSD wires, NGK tr55's, HPP3, TCS 3200 Stall/ 2.7 STR, Spohn lca's and panhard bar To be installed:Kooks longtubes with catted Y, 3.73's, transgo shift kit and other tranny toys. To be painted: VFN Sunoco hood, 96-97 SS spoiler and stripes to boot.
|
|
10-16-2006, 11:24 PM
|
||||
|
||||
|
O yea i forgot to talk about the BFH. I have always loved the sound of that lol.
__________________
---Josh--- Quote:
|
|
10-19-2006, 02:48 PM
|
||||
|
||||
|
what wheels are you gonna run with those?
__________________
2002 onyx black Z28 m6 SS style ram air hood, free ram air mod, slp lid, k&n filter, granatelli maf, smooth bellows slp cai, slp y pipe,skip shift eliminator,corsa catback,STB,sfc's granatelli tunnel brace w/shaft loop,clear corners,granatelli ignition wires waiting to go in: fan switch,grantelli rear lca's,relocation brackets, ,Hotchkis STB,A pillar tripple guage pod, , new iridium plugs Dyno-http://www.z28.com/forum/showthread.php?t=88727 2002 NBM coupe z28 -dead
|
|
10-19-2006, 03:13 PM
|
||||
|
||||
|
I am running 17x11 TT2's with Nitto Extreme Drag 315's, I did have to roll the lip of my fender but other than that no problems at all and that is with 1 inch BMR lowering springs out back along with my amp and subs, haven't tried it with the roll-cage installed but I doubt I will have any problems.
|
|
10-19-2006, 03:17 PM
|
||||
|
||||
|
Big Freaking Hammer, just use a hammer to beat in the inner wheel well some to get clearance but with the right backspacing you won't need to do this for 315s.
|
|
10-19-2006, 09:08 PM
|
||||
|
||||
|
wheels are fikse fm5's like what came on the berger camaros
bowtiez28 do you know what the backspacing or offset is on your wheels
__________________
Joe  396 stroker w/ afr heads finally done callies ds crank,manley pro I beams, coated srp's, afr 210's, tpis zzx cam.3600 stall, 3.73's.
|
|
10-19-2006, 10:06 PM
|
||||
|
||||
|
I think it is 52mm but I really can't remember, I have been meaning to measure it but I haven't had the wheels off for some time now.
|
|
10-19-2006, 11:46 PM
|
||||
|
||||
|
sounds about right thats one they list. thanks fellas
__________________
Joe 396 stroker w/ afr heads finally done callies ds crank,manley pro I beams, coated srp's, afr 210's, tpis zzx cam.3600 stall, 3.73's.
|
|
10-20-2006, 12:47 AM
|
||||
|
||||
|
I have 315s and 10.5" rims and I'm lowered. Since the bump stop sits inside of the rim, I don't need to worry about rubbing. I did the BFH mod too, worked like a charm.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
