11-07-2006, 05:56 PM
|
||||
|
||||
|
Rear rotors?
When I brake lightly, I feel like the brakes pulsating like when your front rotors are warped. Would the same thing happen if the rear ones are warped as well? I feel it when I brake lightly, but if I brake a bit harder, it's smooth again. What would cause this? And I can kind of hear the vibration coming from the rear. Any help?
__________________
 1998 A4 White Z28- 355 HP/ 346 TQ 13.5 @104mph =D Join the Wolfpack!!|Join NIFBA today! -Uli 
|
|
11-07-2006, 06:28 PM
|
|||
|
|||
|
yeah if their warped they will have a similar feal. They are cheep so its not that big of a deal like 20 a peice or somthing I was going to have mine turned befor and the store told me how much new one were, also they wouldent turn them cause they have no tolerance for ware.
My fronts had the same thing happen and if your shure its not them its most likely your rear.
__________________
01 blk ss. MODS: 224/224 114 thunder grind comp cam,spring,rods, retainers,QTP headers, Y pipe, cut out, 3200 stall, trans go shift kit, under drive pully, 3.73's, ported TB, HP tune, Tq mang deleted, M/T drag radials, and austin ram air kit. Now on 243 built heads, 10.7.1 compression, sfc, Tpis 90, tpis 90 TB,and safty loop. Best ET 12.005 @ 113.40 so far
|
|
11-08-2006, 08:11 AM
|
||||
|
||||
|
Shoot, my rears were like $75 a piece...much more than the fronts (this is advance auto, and they're not very good ones either)
__________________
War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. A man who has nothing for which he is willing to fight: nothing he cares about more than his own personal safety, is a miserable creature who has no chance to be free, unless made and kept so by the exertion of better men than himself.
|
|
11-08-2006, 08:57 AM
|
|||
|
|||
|
If the fronts are warped you will feel a vibration in the steering wheel. If the rears are warped you feel the vibration in the car =]
__________________
Me:"You wanna run the SRT4 against me???" SRT4:" Yea, I have a stage 2" Me: "Okay....100 bucks" SRT4:" Is that a roll cage???" Me: "Yea...it's stock, I swear"
|
|
11-08-2006, 10:31 AM
|
||||
|
||||
|
Dang, guess it's the rear ones then... Thanks guys.
__________________
1998 A4 White Z28- 355 HP/ 346 TQ 13.5 @104mph =D Join the Wolfpack!!|Join NIFBA today! -Uli
|
|
11-08-2006, 10:48 AM
|
||||
|
||||
|
Very easy to change but buy some good ones with a lifetime warrenty so you won't have to buy them again.
__________________
Gregg 2000 Z28 NBM A4 -SLP STB,Bellows,CAI, Lid-UMI Panhard & Relos-Lakewood LCA-NGK TR6-Taylor 409 -K & N-AMW OCC-March U/D Pulley-B & M 24K TC -BMR SFC's-Edelbrock TA-LG DSL-Bilstein HD's-35mm front & 21mm rear SB-Edelbrock LTs-Dynomax Ultra Flo CB-Ported TB-Prothane TM-LS6 manifold-B&M DTP-LPE GT2-3 Cam-TR pushrods-PRC Dual Springs-Yank 3500-HPTune-MAC girdle-Soon-Cutout  1991 Z28 1LE-305TPI-5-speed-37K miles
|
|
11-08-2006, 05:11 PM
|
|||
|
|||
|
I think I bought mine at NAPA and they were cheep maby they messd up it was a long time ago that I replaced them but I rember them being cheep lie 20 to 30 at the most each.
__________________
01 blk ss. MODS: 224/224 114 thunder grind comp cam,spring,rods, retainers,QTP headers, Y pipe, cut out, 3200 stall, trans go shift kit, under drive pully, 3.73's, ported TB, HP tune, Tq mang deleted, M/T drag radials, and austin ram air kit. Now on 243 built heads, 10.7.1 compression, sfc, Tpis 90, tpis 90 TB,and safty loop. Best ET 12.005 @ 113.40 so far
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
