|
|
|||||||
| View Poll Results: Should I change to these from my stock lights | |||
| Keep the stock lights |
|
22 | 78.57% |
| They look good |
|
0 | 0% |
| I should check into a different set of lights |
|
6 | 21.43% |
| Voters: 28. You may not vote on this poll | |||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
|
|||
|
Checking to see what you think
Hey all,
I'm putting up a poll, I did a mediocre chop of some tail lights that JonnyZ28 has on his car to see what they'd look like. I just wanted to know what everyone else thinks about them. I have a feeling I know what you're going to say but I thought I'd humor myself Darktide
__________________
Jay ![]() 2001 Chevrolet Camaro Z28 Hooker Catback - MSD Wires - Z06 Wheels Free Ram Air - K&N Filter - more to come (suggestions welcome)
|
|
|||
|
I personally never liked that style of tail light. Then again I dont any aftermarket tail light that I have seen. Personally I would either keep the factory tails of get some LT1 style tails to get rid of the Amber.
I agree with DC, have that sticker pulled off the bumper. It would clean up the tail so nicely.
__________________
My Rides ![]() Mods:Corsa Premium series Catback, Ported throttle Body, Slp cold air pack, MSD wires, NGK tr55's, HPP3, TCS 3200 Stall/ 2.7 STR, Spohn lca's and panhard bar To be installed:Kooks longtubes with catted Y, 3.73's, transgo shift kit and other tranny toys. To be painted: VFN Sunoco hood, 96-97 SS spoiler and stripes to boot. |
|
|||
|
Yeah I know about the sticker. That was one of my original photos. Notice the license plate? its not whited out. It was a piece of paper from the dealership. I took that one before I even got to my house (it was at my parents house which is about half way home from the dealership). The sticker's gone.
I'm just looking to do something different. And i'm not a big fan of the LT1 lenses as its not really that different. I've been looking into the smoke covers or something along those lines too. Thanks for all the input, I'd write more but I gotta get going to a Christmas party. Jay
__________________
Jay ![]() 2001 Chevrolet Camaro Z28 Hooker Catback - MSD Wires - Z06 Wheels Free Ram Air - K&N Filter - more to come (suggestions welcome)
|
|
||||
|
go with the older stock lt1's without the yellow section
those aftermarket lights look crappy...not to mention rice
__________________
2002 onyx black Z28 m6 SS style ram air hood, free ram air mod, slp lid, k&n filter, granatelli maf, smooth bellows slp cai, slp y pipe,skip shift eliminator,corsa catback,STB,sfc's granatelli tunnel brace w/shaft loop,clear corners,granatelli ignition wires waiting to go in: fan switch,grantelli rear lca's,relocation brackets, ,Hotchkis STB,A pillar tripple guage pod, , new iridium plugs Dyno-http://www.z28.com/forum/showthread.php?t=88727 2002 NBM coupe z28 -dead |
|
|||
|
Ouch! Alright alright. I have to call it on that one. I tried my best to chop in a set of LT1 tail lights and they do look much better in my opinion than even the stock ones. Now I just need to find a pair nice and cheap. Thanks for the input everyone.
Jay
__________________
Jay ![]() 2001 Chevrolet Camaro Z28 Hooker Catback - MSD Wires - Z06 Wheels Free Ram Air - K&N Filter - more to come (suggestions welcome)
|
|
||||
|
Sorry Jay. Gotta agree. Either the LT1s or shades.
__________________
Jesus Loves You Just The Way You Are! Do you know where you'll be? Jim ~ ~ CamaroQueen is a sweet Lady andGreg Norris punches rice in the soul.
|
|
||||
|
shades would be the easiest assuming you can find a pair for ~30$
__________________
2002 onyx black Z28 m6 SS style ram air hood, free ram air mod, slp lid, k&n filter, granatelli maf, smooth bellows slp cai, slp y pipe,skip shift eliminator,corsa catback,STB,sfc's granatelli tunnel brace w/shaft loop,clear corners,granatelli ignition wires waiting to go in: fan switch,grantelli rear lca's,relocation brackets, ,Hotchkis STB,A pillar tripple guage pod, , new iridium plugs Dyno-http://www.z28.com/forum/showthread.php?t=88727 2002 NBM coupe z28 -dead |
|
|||
|
Well, after looking into it and looking at them on my car, I do tend to like the LT1's. Though while searching for a pair from someone here might be selling so I can help'm out I noticed that someone said that the light sockets for the LT1's are different from the LS1's. I couldn't find anything on a swap so I was wondering if any one knew any thing about doing a swap? How involved is it if something needs to be done? The guy who had the car before me had a real blue/red scheme going and I think the amber throws it off. The LT1's look good enough on their own. But maybe i'll shade them with the film or the spray. *shrug*
Jay
__________________
Jay ![]() 2001 Chevrolet Camaro Z28 Hooker Catback - MSD Wires - Z06 Wheels Free Ram Air - K&N Filter - more to come (suggestions welcome)
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|