12-27-2006, 11:09 AM
|
||||
|
||||
|
Monsoon amp specs
Anyone know the specs of the monsoon amp, specifically RMS output. I just picked up my '02 and I'm pretty sure the door speakers are blown cause they rattle pretty bad when the bass hits. I have to find some replacements or have GM put new ones in.
|
|
12-27-2006, 12:59 PM
|
||||
|
||||
|
the rattle doesnt necessarily mean they are blown,
the plastic "grille" cover just comes loose and vibrates like hell when the bass hits, try holding them when you have a song on with some bass and see if it solves the buzzing if so remove whatever you need to to get to the backs and pop the grilles off and reattach them with some sticky 3m tape or something
__________________
2002 onyx black Z28 m6 SS style ram air hood, free ram air mod, slp lid, k&n filter, granatelli maf, smooth bellows slp cai, slp y pipe,skip shift eliminator,corsa catback,STB,sfc's granatelli tunnel brace w/shaft loop,clear corners,granatelli ignition wires waiting to go in: fan switch,grantelli rear lca's,relocation brackets, ,Hotchkis STB,A pillar tripple guage pod, , new iridium plugs Dyno-http://www.z28.com/forum/showthread.php?t=88727 2002 NBM coupe z28 -dead
|
|
12-31-2006, 01:18 PM
|
||||
|
||||
|
Alright I'll assume the amp puts out about ~50W RMS per channel, since stock decks put out about 15W RMS, 50W seems reasonable. So you can just replace the door speakers with aftermarket ones without issues, correct? Most handle 20-100W RMS, so I can't see it being a problem, unless someone has done it with poor results.
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
