12-30-2006, 03:09 AM
|
|||
|
|||
|
just a question
i found a cheap 99 z28 and its in perfect condition except on the rear quarter panel its kinda banged up, wonderin where i could find new quarter panels, cause if i can find one cheap ima get this car and jus fix that
|
|
12-30-2006, 08:17 AM
|
|||
|
|||
|
Well, put it this way. I did a little damage to my passenger quarter panel. I'm talkin paint was chipped but primer is still there and a small dent needs to be popped out... $625 for any body shop to do it.... a collision center wants $1200.... No such thing as cheap... and that's just fixing my current panel. I never knew Bondo was made out of gold sheesh.
Darktide
__________________
Jay  2001 Chevrolet Camaro Z28 Hooker Catback - MSD Wires - Z06 Wheels Free Ram Air - K&N Filter - more to come (suggestions welcome) 
|
|
12-30-2006, 01:59 PM
|
||||
|
||||
|
see if you can find a junk yard with a 1/4 in any color for about the same year
it really doesnt matter because 93-02 are nearly identical rears but the closer to your year the better because you might be able to find the color then just have it painted oe color and swap em out, mim betting itll be easier than the shop doing metalwork on it
__________________
2002 onyx black Z28 m6 SS style ram air hood, free ram air mod, slp lid, k&n filter, granatelli maf, smooth bellows slp cai, slp y pipe,skip shift eliminator,corsa catback,STB,sfc's granatelli tunnel brace w/shaft loop,clear corners,granatelli ignition wires waiting to go in: fan switch,grantelli rear lca's,relocation brackets, ,Hotchkis STB,A pillar tripple guage pod, , new iridium plugs Dyno-http://www.z28.com/forum/showthread.php?t=88727 2002 NBM coupe z28 -dead
|
|
12-30-2006, 03:16 PM
|
|||
|
|||
|
If it can be worked out, its not too bad. If you are gonna change the 1/4 expect a good amount of loot.
__________________
My Rides   Mods:Corsa Premium series Catback, Ported throttle Body, Slp cold air pack, MSD wires, NGK tr55's, HPP3, TCS 3200 Stall/ 2.7 STR, Spohn lca's and panhard bar To be installed:Kooks longtubes with catted Y, 3.73's, transgo shift kit and other tranny toys. To be painted: VFN Sunoco hood, 96-97 SS spoiler and stripes to boot.
|
|
12-30-2006, 03:18 PM
|
||||
|
||||
|
I can cut a 1/4 panel off my 95 for you but keep in mind the 1/4 panel doesn't just bolt on.. it will require cutting, welding, grinding, etc... how bad is it banged up? If its just dents then you shouldn't have a problem popping them out
__________________
ubi dubium ibi libertas
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
