Z28 Front Bumper

[als70LT1]

I have just purchased a 1970 LT1 Z28. It is not an RS but I would like to change out the front bumper with the split bumpers. Is this as easy as it seems or is there a catch?

Thanks

[79-Z]

should be easy. The only problems i have heard of with front end swaps with second gens is swapping a 79 with a 70. Should be fairly easy. I like the split bumpers alot better. good luck with the swap.

[mike mitchell]

as long as you have all the mounting hardware it will bolt right up. it really cleans up the front end and makes it look pretty mean.

[BBCAM]

The actual RS front end is different than the standard front, but the split bumpers will bolt onto a non RS front but it won't be correct you have to replace both the upper and lower valance and marker/turn signal lens plus the center urathane bumper section for a RS front and the bumperettes for a complete RS front. the RS has the signal lamps in the upper section of the valance where the standard has the marker/signals at the bottom of the lower valance ..