where to get the nice subs for trunk?

[Kristoff]

Anyone know where to get that nice box that sit right in the back of the trunk for a 3rd gen? Saw it in a couple of camaros now. Thanks for info.

[Compstall]

http://www.subthump.com

[Kristoff]

Thanks and there is no difference in trunk sizes from 3rd gen to 4th? because the years are 93 and up. thanks.

[Compstall]

Trunk size isn't different, but I'd make sure the shape is the same.

[LS1DER]

Just so you don't get confused later down the road the 3rd gen is 82-92 and the 4th gens are 93-02

[Kristoff]

Originally Posted by LS1DER

Just so you don't get confused later down the road the 3rd gen is 82-92 and the 4th gens are 93-02

ya I know i posted the years are 93 and up thats why i asked if 3rd and 4th are the same because they dont have 82 and up sorry for confusion.

[Spyderking69]

how far is pottsville from pittsburgh?

[Kristoff]

Originally Posted by Spyderking69

how far is pottsville from pittsburgh?

like 4 hours

[FlBoyZ/28]

check out audioenhancers. that is where i got mine from, good build quality and perfect fit. all screwed and glued. you can get them thru hifisoundconnection and they were even reasonable on shipping.

[Spyderking69]

Originally Posted by Kristoff

like 4 hours

that sux if u were closer id come out and help you build one its pretty easy

[Kristoff]

Originally Posted by Spyderking69

that sux if u were closer id come out and help you build one its pretty easy

ya i might attempt a build any advice on what to use? to produce good sound qaulity?

[Spyderking69]

Originally Posted by Kristoff

ya i might attempt a build any advice on what to use? to produce good sound qaulity?

yeah go to Lowes and get some MDF (multi-density fiberboard) get the 1/2inch thick stuff, some wood glue, and some 1 5/8 drywall screws. just measure the trunk area and basicly cut the MDF to the shape of the trunk. put it together by glueing one pieve to another at a time, predrill the holes for the screws before you use them so u dont crack the MDF

[cdoyle]

Originally Posted by Spyderking69

yeah go to Lowes and get some MDF (multi-density fiberboard) get the 1/2inch thick stuff, some wood glue, and some 1 5/8 drywall screws. just measure the trunk area and basicly cut the MDF to the shape of the trunk. put it together by glueing one pieve to another at a time, predrill the holes for the screws before you use them so u dont crack the MDF

I would recommend 3/4 MDF over 1/2.
3/4 is the standard thickness used in sub boxes.

Another option is to fiberglass a box too, it will be much lighter and easier to pull out of the well if needed.

[Spyderking69]

Originally Posted by cdoyle

I would recommend 3/4 MDF over 1/2.
3/4 is the standard thickness used in sub boxes.

Another option is to fiberglass a box too, it will be much lighter and easier to pull out of the well if needed.

crap my bad yoru right it is 3/4in idk y i thought and said to use 1/2 inch brain fart

[Adamzplayboy]

mtx.com