What size jets

[Z/YA]

I have a wet kit and I am trying to figure out what size jets I need to run, I am wanting to make around 125hp.

My fuel pressure is around 45ish and I think bottle pressure shoud be around 900psi, and I have one port. I was wondering if anyone knew off hand what jets I should run since 125hp seems to be a popular number.

I have checked off a culculator and I am coming up with a nitrous jet of .056 and a fuel jet of .031 does that seem right? I am not sure if I am doing that right when putting the numbers in am I supposed to look at rwhp or crank? Its saying rwhp to be 120hp and crank to be 141hp

[FANTA-Z]

Jetting would depend on which kit your running actually. So what are ya running

[Z/YA]

I am running a wet NOS kit.

[FANTA-Z]

Its at the lower part of the page.

http://www.angelfire.com/fl4/pontiac...alculator.html

[Z/YA]

Ok thanks that helped out alot a couple of quick questions, whats size is the stock injector? and also how hot does a bottle heater get? because my rings have rubber on them and the bottle heater is inbetween the bottle and them and I was just wanting to make sure that it won't hurt anything.

If all goes well I will have all this NO2 stuff done tomorrow, thanks Fanta on all your help could not of done it with out ya

[FANTA-Z]

Injectors depends on the year of the car. 93s had 19s if I remmeber correctly and 94-97 had 24s, and Im not positive on the LS1s. As for the heater it does get pretty warm but I do believe you will be ok.