|
|
|||||||
| Nitrous Tech NOS, Nitrous Express, ZEX... |
 |
|
|
LinkBack (1) | Thread Tools | Search this Thread | Display Modes |
07-22-2009, 07:27 PM
|
|||
|
|||
|
purge system
hey guys i just got this dual purge kit and i got it on and i could only see the nitrous the first day i got my bottle filled and now everytime i turn it on u cant see it but u can hear it..why is this..pressure dropped maybe..
__________________
 02 Z28,auto,k and n filter,slp flow pack induction kit,slp thermostat,slp mass air flow sensor,ported and polished throttle body,hooker longtube headers.x-pipe with magnaflow bullits,ngk plugs,msd wires,slp strut bar, aluminum driveshaft,373 gears,3200 stall converter,and 125 shot of nos,tuned by antivenom performance.
|
|
07-22-2009, 07:31 PM
|
||||
|
||||
|
Pressure dropped or you got taken by the people that filled your bottle and they placed more air than nitrous
 A lot of the tracks do that around here.
__________________
 Glenn 2010 Camaro Inferno Orange Metallic 2SSRS (Amber) 03 Envoy (Ebony) "Worry looks around, Sorry looks back, Faith looks up."
|
|
07-22-2009, 08:13 PM
|
|||
|
|||
|
Quote:
__________________
 Patriot 226 cam, HSW 75 shot, Vig 3600, Richmond 3.73's, Pacesetter LT's, 2.5in TD's w/ H-pipe & 1-chamber flowmasters, TSP lid Buried Needle Racing!!
|
|
07-25-2009, 04:28 PM
|
|||
|
|||
|
So should I get a bottle heatter and I live in a florida and its about 95 degrees everyday..
__________________
02 Z28,auto,k and n filter,slp flow pack induction kit,slp thermostat,slp mass air flow sensor,ported and polished throttle body,hooker longtube headers.x-pipe with magnaflow bullits,ngk plugs,msd wires,slp strut bar, aluminum driveshaft,373 gears,3200 stall converter,and 125 shot of nos,tuned by antivenom performance.
|
|
07-25-2009, 06:51 PM
|
||||
|
||||
|
I would get a gauge and yes a bottle heater if you want to get the most out of your system. This way you can keep the pressure at the same setpoint each time. I ran mine right at 1050 psi. I had the electric gauge in the dash cubby hole and I would turn the heater on and watch the gauge until it got to the desired point and then shut the heater off.
__________________
Glenn 2010 Camaro Inferno Orange Metallic 2SSRS (Amber) 03 Envoy (Ebony) "Worry looks around, Sorry looks back, Faith looks up."
|
|
08-27-2009, 09:58 AM
|
|||
|
|||
|
go to a NOS cert dealer, NOS has standards they have to keep
__________________
97 z28 black t-top M6... Flow masters cat-back, Electric water pump, Accel Opti., lingenfelter CAI
|
|
09-10-2009, 11:56 PM
|
|||
|
|||
|
dont wory and best of luck!
|
|
09-11-2009, 01:34 AM
|
|||
|
|||
|
Best of luck!
|
|
10-06-2009, 05:08 PM
|
||||
|
||||
|
are you sure the bottle you have is not leaking? i had that happen and when pressure would drop down low it would still purge but would not be NOS, zex bottles have a issue with holding nos and leaks around the top if you let it get to cold when its filled and alot of nitrous would leak out till it warmed up.
__________________
Hello my name is TOM and my car is FROSTBITE!  95 Z28 383, Ported Heads,intake,cc306,crane springs,1.6rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats! Its all stock i swear
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
LinkBacks (?)
LinkBack to this Thread: http://www.Z28.com/forum/nitrous-tech/134249-purge-system.html
|
||||
| Posted By | For | Type | Date | |
| purge system - The Z28 Forums | This thread | Refback | 09-16-2009 06:44 AM | |
Linear Mode
