|
|
|||||||
| Projects Place to post your short and long term vehicle projects |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
11-13-2009, 04:45 PM
|
||||
|
||||
|
and for what they will look like put together.
__________________
Hello my name is TOM and my car is FROSTBITE!  95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
11-13-2009, 04:47 PM
|
||||
|
||||
|
This is a low mount alternator relocation bracket kit, it comes as bare steel, and i will then powder coat it blue or chrome not sure yet. With all hardware and belt.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
11-13-2009, 04:50 PM
|
||||
|
||||
|
A picture of the BMR A/c delete panal after i clearcoated it. Looks great. I have a ton of bolts at my house since i have a full garage of tools so i had tons of new bolts. BMR does not supply a bolt kit for this, so i used grade 5 polished bolts with washers and nuts.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
11-13-2009, 04:53 PM
|
||||
|
||||
|
And last for today is the newley painted engine compartment.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
11-13-2009, 07:05 PM
|
||||
|
||||
|
Wow, one off for sure. I like your ideas and your work. Nice going.
__________________
Cam video: http://s457.photobucket.com/albums/q...lt4l60e013.flv  One big love affair! Hate those wheels.
|
|
11-14-2009, 09:59 AM
|
||||
|
||||
|
Thanks Rich, its all in the planning and taking the time. Not rushing. the valve covers are sick, and with there not going to have any othere drives on the motor it will look very cleanand very unique.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
11-27-2009, 11:26 AM
|
||||
|
||||
|
So i got a Canton road race pan from Glenn aka Fanta z, im going to have it powder coated blue to match my othere stuff. I also got a 58mm tb thats polished and made by profesional product's.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 01:52 AM
|
||||
|
||||
|
wow just read through the 7 pages of this thread... wesome build!
__________________
 ET=14.6 BONE STOCK 94 Z28 A4
|
|
12-03-2009, 09:39 AM
|
||||
|
||||
|
Thank you very much pumpkin... i have more pictures to add today. there is alot to do and im almost done. this will be one very sick z28 when im done.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 12:20 PM
|
||||
|
||||
|
Ok this is the BMR A/C delete panel that i added my stickers to. Then the next picture is the Panel installed. I started to rewire the car since the engine bay paint is now dry and cured.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 12:23 PM
|
||||
|
||||
|
And more of the enigne compartment on the driver side this time.
Now here is the mock up of the new intake manifold set-up i will be useing. i painted the intake black after i fulley ported the intake,it now is 58mm, it's also intake matched to the custom ported heads. the intake has also been blended in some area's inside the intake to promote flow. Then i painted the top machined area to match the white. I then poilshed the fuel rail's
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 12:27 PM
|
||||
|
||||
|
Close up of the fuel rail.
The map sensor is new, and i also have a new plug for all the sensors. I painted the throttle cable bracket gloss white as well. everything on the intake will be held together with custom polished button head bolts. and the intake will have arp 12 point polished bolts. And the Aeromotive Ajustable Fuel Pressure regulator
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 12:31 PM
|
||||
|
||||
|
A close up of the white inlay on the top of the intake
a back shot with the block off plates and FPR a few shots with the flame valve covers and the last pic is the low mount alternator bracket painted. will post some Throttle body pictures before and after of corse. and a mock of what the motor will lokk close to done in the next few days.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 04:10 PM
|
||||
|
||||
|
This is a profesional products 58 mm throttle body that is polished.
i then took the throttle plate off and tried at first to install a custom one that would not line up. after messaging it a little it went right on. then a few shots of it moched up on the intake.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
12-03-2009, 04:11 PM
|
||||
|
||||
|
And a side view and another top view. i think im going to polish out the sir foil a little and smooth it out.
__________________
Hello my name is TOM and my car is FROSTBITE! 95 Z28 383, Ported Heads,intake,custom cam,crane springs,1.7rr,comp pushrods,Flame covers,lt4KM,Full MSD,NOS wet,58mm polished TB,SLP CAI,Low Alt,Mac headers,Flowmaster,Canton pan,melling pump,billet FPR,accell 42lb,Lakewood drag shocks,BMR Arm's,Hotchkis panhard ajust,moser axle,eaton locker,4.10,built 4l60e,2800stall,No Air!Smog!PS!Heater!Egr!Seats Thanks for all the help!!
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
