07-04-2007, 12:41 AM
|
||||
|
||||
|
Suspension problem
Well I got my Bilstein HD front shocks today. As I was taking off my KYB shocks I noticed that my Bilstein shocks did not come with the cup to hold my spring, its just a straight shock. My question is what can I do?
__________________
|
|
07-04-2007, 06:21 AM
|
||||
|
||||
|
Don't take my word because I could be remembering the wrong piece since I have not personally done the install, but if I remember correctly you just use the old ones.
__________________
- Willy  1997 Camaro Z28 (LT1/T56): K&N CAI | Kooks 1 3/4" LTs | 3" Custom Duals | UMI LCAs w/ relocation brackets | UMI adj. panhard bar | UMI adj. torque arm | Koni SA shocks | Strano Springs | Ram Powergrip clutch | Pro 5.0 shifter | skip shift eliminator kit | WS6 Store rotors | Hawk HPS pads
|
|
07-04-2007, 08:00 AM
|
||||
|
||||
|
I had to use the old ones.
__________________
Brandon  1996 Z28 LT1, Cosca Exhaust Twin Pro Series 3.5tips, Slp fan control switch, BMR lower tubular arms, BMR standard ajustible Panhard Rods, Slp subframe connectors, Tubular shock tower brace, LPE Cold air Intake, PCMforless, Delco Platinum Plugs, Delco Opti
|
|
07-04-2007, 11:12 AM
|
||||
|
||||
|
Are you talking about the old one that were on the stock shocks? Yeah I threw those out years ago when I put m DMS springs and KYB shocks on
__________________
|
|
07-06-2007, 11:28 PM
|
||||
|
||||
|
Had a good ol' time getting the cups off of Gregg's stock springs, didn't we?
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
