07-21-2008, 10:38 AM
|
||||
|
||||
|
Squeeky Noises
Been noticing that everytime i go over any bumps i get a real annoying squeeking noise coming from the hatch area of the car, im thinking maybe its my exhaust in the rear, or is it the hatch itself, its driving me nuts lol, anyone have borla and have the same noise?
__________________
 2000 Camaro Z28- 51k Nitrous Cam, Ford SVO 36lb Injectors, SLP Longtubes, Corsa Exhaust, Fast Toys Ram Air Kit, LS6 Intake, Smooth Bellows, 241 Heads, LS2 Oil Pump, 4L60E SLP 3000 Converter, Corvette Servo, Shift Kit, Tranny Cooler, 12-Bolt 373 Moser Rear C-Clip Elim Axles Eaton Posi Unit, BMR LCA's SLP Subframes, BMR Adj Torque Arm, SLP Line Lock Kaltech Tune 360/345 rwhp/tq on Mustang Dyno
|
|
07-22-2008, 08:36 AM
|
||||
|
||||
 Dunno, could be a million things......if it was your exhaust I would think it would be more of metal to metal noise. If you get a chance, jack the car up and get underneath and see if anythings loose
__________________
 http://www.cardomain.com/ride/2687543/1http://www.gmhightechperformance.com..._ss/index.html
|
|
07-22-2008, 09:53 AM
|
|||
|
|||
|
ive had that - but it was the cover to the t-top area lol. it fell sideways and i didnt notice, i thought it was my amp crackling and squeeking.. if its not that is ur suspension looking saggy on 1 side or the other? did u recently hit any crazy bumps, etc
__________________
'99 Camaro z28 M6 Rear Mount T67, FMIC, 317 Heads, EPP FI Cam, 60lbs Injectors, Walbro 255 Pump, LS7 Lifters, Patriot Dual Gold Springs, MT ET Streets, BMR SFC, BMR Springs, AGX KYB Struts
560rwhp/589rwtq @ 10psi + Meth
|
|
07-22-2008, 10:38 AM
|
||||
|
||||
|
Quote:
Quote:
sounds like its coming from the back area, im gonna have to jack her up, its raining today, but thanks guys i will keep u posted
__________________
2000 Camaro Z28- 51k Nitrous Cam, Ford SVO 36lb Injectors, SLP Longtubes, Corsa Exhaust, Fast Toys Ram Air Kit, LS6 Intake, Smooth Bellows, 241 Heads, LS2 Oil Pump, 4L60E SLP 3000 Converter, Corvette Servo, Shift Kit, Tranny Cooler, 12-Bolt 373 Moser Rear C-Clip Elim Axles Eaton Posi Unit, BMR LCA's SLP Subframes, BMR Adj Torque Arm, SLP Line Lock Kaltech Tune 360/345 rwhp/tq on Mustang Dyno
|
|
07-22-2008, 01:25 PM
|
||||
|
||||
|
Lower Control Arms is a possibility. That's what was caussing the squeeking on mine.
__________________
Travis Founder/President - Eastern Panhandle Camaro Association www.easternpanhandlecamaro.com  All Camaro and Firebird Show - May 1st in Martinsburg, WV
|
|
07-22-2008, 02:51 PM
|
||||
|
||||
|
suspension
__________________
CamaroQueen is a sweet lady and Warthog is a cool dude! imports need turbos like old men need viagra, cause without it you couldnt perform Quote:
|
|
07-22-2008, 04:22 PM
|
||||
|
||||
|
ok i found it i think its the rubber hold up tabs that hold up the borla tips, im gonna spray them with oil to see if it helps
__________________
2000 Camaro Z28- 51k Nitrous Cam, Ford SVO 36lb Injectors, SLP Longtubes, Corsa Exhaust, Fast Toys Ram Air Kit, LS6 Intake, Smooth Bellows, 241 Heads, LS2 Oil Pump, 4L60E SLP 3000 Converter, Corvette Servo, Shift Kit, Tranny Cooler, 12-Bolt 373 Moser Rear C-Clip Elim Axles Eaton Posi Unit, BMR LCA's SLP Subframes, BMR Adj Torque Arm, SLP Line Lock Kaltech Tune 360/345 rwhp/tq on Mustang Dyno
|
|
07-22-2008, 08:25 PM
|
|||
|
|||
|
i dont think the rubber tabs wud be squeaking, i remember mine did that when i first got it and didnt think anything of it, it went away eventually. cuz my rubber on my tips are up against just the body and i dont think it would make any noise if it was moving around? what kind of tips do you have? quad or just dual?
__________________
2002 z28 M6 convertible. Ms4 Camshaft. borla adj. catback-wide open. slp flo-pac. pacesetter lt's and ory. cats history  . boyd cottington rims. 53 k miles.
|
|
07-22-2008, 11:21 PM
|
||||
|
||||
|
Quote:
i got the quad dual tips in stainless
__________________
2000 Camaro Z28- 51k Nitrous Cam, Ford SVO 36lb Injectors, SLP Longtubes, Corsa Exhaust, Fast Toys Ram Air Kit, LS6 Intake, Smooth Bellows, 241 Heads, LS2 Oil Pump, 4L60E SLP 3000 Converter, Corvette Servo, Shift Kit, Tranny Cooler, 12-Bolt 373 Moser Rear C-Clip Elim Axles Eaton Posi Unit, BMR LCA's SLP Subframes, BMR Adj Torque Arm, SLP Line Lock Kaltech Tune 360/345 rwhp/tq on Mustang Dyno
|
|
07-23-2008, 05:58 PM
|
|||
|
|||
|
If you think it is coming from the Hatch..
Go to the back of your car and gently push down on the hatch and see if there is any play in it.. If you raise your hatch and look up at each end of the hatch there is adjustable bumpers screwed into the hatch on each back end of the hatch.. You can raise and lower them by turning them.. By letting it come down a little more it might put a little more pressure on the hatch and prevent it from bouncing around if that is your problem
__________________
2002 Z/28,Fasttoys 85mm Lid,SSRA C.A.I.,TPIS 90mm t.b., TPIS 90mm intake, Heads 11:35 c.r., Cam, Viglilante 3600 T.C., Fully built 4L60E ,Perma-Cool tranny Cooler w/elec fan, SLP pulley, Katech Tensioner,QTP HV Oil pump, QTP 1 3/4 Headers w/HVMC, Mufflex Custom Stainless Y-pipe, QTP 2OTL Muffler w/built in QTEC, Moser 12-bolt and more crap..
|
|
07-23-2008, 11:03 PM
|
||||
|
||||
|
Quote:
checked the hatch and pushed down it dont seem like its coming from there at all
__________________
2000 Camaro Z28- 51k Nitrous Cam, Ford SVO 36lb Injectors, SLP Longtubes, Corsa Exhaust, Fast Toys Ram Air Kit, LS6 Intake, Smooth Bellows, 241 Heads, LS2 Oil Pump, 4L60E SLP 3000 Converter, Corvette Servo, Shift Kit, Tranny Cooler, 12-Bolt 373 Moser Rear C-Clip Elim Axles Eaton Posi Unit, BMR LCA's SLP Subframes, BMR Adj Torque Arm, SLP Line Lock Kaltech Tune 360/345 rwhp/tq on Mustang Dyno
|
|
12-20-2009, 07:56 AM
|
||||
|
||||
|
I have the same problem a chirping noise.every little bump I hit."ChIRP ChIRP ChIRP. sounds like in my hatch.did you fix your problem?
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
