04-01-2009, 11:38 AM
|
|||
|
|||
|
Spacer or not?
My son has a 1994 Z28. Last weekend, he set out to replace the rear shocks. When doing so, he found that the passenger side shock had a spacer, but the drivers side did not. This spacer was about 3/4 of an inch, and was placed on the stud that is welded to the top of the shock. So my question is please, is this stock? The shocks that were taken out had already been replaced by the previous owner, so we cant tell whether the previous owner lost one, or was trying to tune something with just having a spacer on the passenger side.
Thank you, Bryans Dad (Bob) 
|
|
04-01-2009, 12:31 PM
|
|||
|
|||
|
Doesnt sound stock.
__________________
 04 CTS-V STOCK 71 Chevy LWB w/ 6.0/4L80e swap SOLD 97 Z28 LT1: 1.5/11.80 @ 113 LS1: 1.5/11.59 @ 113
|
|
04-01-2009, 12:43 PM
|
|||
|
|||
|
When I replaced my stock shocks I didn't have anything like that so as previously stated it doesn't sound stock.
__________________
97 Z28 383, Hooker Long Tube, All Bolt Ons, SPEC Stage 3, 200 Plate NOS, Dana S60
|
|
04-01-2009, 01:03 PM
|
||||
|
||||
|
I dont believe I had one either. If you have a pic post it up.
__________________
 Glenn 2010 Camaro Inferno Orange Metallic 2SSRS (Amber) 03 Envoy (Ebony) "Worry looks around, Sorry looks back, Faith looks up."
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
