stroker motor

[GreenZ]

I want to convert my 94 z into a stroker. where could i find a good kit that would work well with about a 100 shot of NO2. Would a stroker work well with the cam i have? Comp Cams, 480 int...488 ext with 276 duration. How much would a stroker kit cost?

[86RedRocket]

I've seen complete 383 rotating assemblies by Lunati for $1800

[GreenZ]

Thanks, i found it on Thunder Racing.

[btchncamaro]

www.speedomotive.com

[sirwrenchalot]

hey
bla bla bla there is no replacement like displacement, but realize that you gain 30...33 on an overbore 33 cubic inches of displacement for $2000 or more. if you're swapping pistons, rods, and crank, hell do it up. flow makes hp, and in a sbc, head are flow...but realize your valves are still shrouded by a smaller bore, and due to the lt1 factory spec'ing on the block from the factory...you're playing with a peak of 600 or less hp before bore vs rest of block becomes an issue. you can't beat speed o motive, though. I have 2 383s...one monty running 10./s so ....